Description
We offer a Ramp (single 6-48 screw mounted) allowing the addition of any standard 3/8" dovetail, 3/8" wide base front sight.
(Please see our FRONT SIGHT page for front sights)
note: Sight dovetails are made slightly oversized to allow exact fitting during installation. Fit until the sight pushes 1/3 into the ramp dovetail, then gently tap to center. No pounding. If you have access to a sight pusher, even better.
These ramps look good and are easily installed by a competent Gunsmith. They will accept any standard 3/8" dovetail front sight.
(Note: Although we can get "Close" on height, front sight selection will require shooting on paper at a known distance with a "Temporary" front sight. We recommend using a black "ZIP TIE" fastened around the muzzle, bent vertical, then "clipped" with a side cutter or finger nail clipper,etc.) After the proper height is determined, a Ramp/Sight combo can be selected)
Ramp only. Select the front sight of your choice from our front sight selections.
Tab title
We offer a Ramp (single 6-48 screw mounted) allowing the addition of any standard 3/8" dovetail, 3/8" wide base front sight.
(Please see our FRONT SIGHT page for front sights)
note: Sight dovetails are made slightly oversized to allow exact fitting during installation. Fit until the sight pushes 1/3 into the ramp dovetail, then gently tap to center. No pounding. If you have access to a sight pusher, even better.
These ramps look good and are easily installed by a competent Gunsmith. They will accept any standard 3/8" dovetail front sight.
(Note: Although we can get "Close" on height, front sight selection will require shooting on paper at a known distance with a "Temporary" front sight. We recommend using a black "ZIP TIE" fastened around the muzzle, bent vertical, then "clipped" with a side cutter or finger nail clipper,etc.) After the proper height is determined, a Ramp/Sight combo can be selected)
Ramp only. Select the front sight of your choice from our front sight selections.