THIS SIGHT WILL FIT ALL 1894/94 WINCHESTERS.
ANGLE EJECT DOES NOT REQUIRE GUNSMITHING.
All other models require 2 6-48 holes drilled and tapped, gunsmith installation recommended.
FULLY WINDAGE AND ELEVATION ADJUSTABLE.
(On our test rifles, this sight worked perfectly with the factory front sight. Your result may vary.)
Accepts all SKINNER SIGHTS APERTURES. (5 sizes available)
Ships with a .096" (standard) aperture installed)
Comes with wrenches and screws for installation and adjustment.
Available in BLUE only at this time.
$80 in BLUE
"BLACK GOLD" Option Available.
(Order the BLUE sight and add the BLACK GOLD option from our SPECIAL ITEMS Page)
Winchester 1886 / Model 71
Looking for a receiver sight for your Winchester / Browning / Chiappa Model 1886 / Model 71? This sight sits low and rugged positioning the "peep" on top of the bolt. Unlike tang mounted sights, the SKINNER 1886 sight allows a normal "thumb over wrist" carry of the rifle and is not hitting you in the nose during stiff recoil. Tang sights are often down when you want them up, up when you want them down and are easily bent out of position. NOT SO with our SKINNER 1886 sight. This is a VERY RUGGED sight, machined from SOLID BAR STOCK, and adjustable for WINDAGE and ELEVATION.
This is the same sight Big Horn Armory uses on the Model 89 500 S&W
and as used on the Skinner Sights 1886 BUSH PILOT (Shown)
Requires two 6-48 holes drilled and tapped on top of the bolt .860" C~C
Very easy to install, we can do it here in house if you send us the bolt.
Call for install details 406-745-4570
This sight ships with a .096" aperture installed.
(other APERTURES available)
Mounting screws and wrenches included.
(Our infamous "BLACK GOLD" option is available via the SPECIAL ITEMS page.)
$80 in BLUE
WINCHESTER / BROWNING 1895
Looking for a receiver sight for your Winchester / Browning 1895?
For several years I've been using Winchester 1895 reproductions for much of my hunting both in the US and Internationally.
These rifles are "romantic", beautiful, and effective in the field.
Ask Teddy, he knew what was up...
Adding a Skinner bolt mounted peep sight makes all the difference in sight radius, a superior aperture sighting system, and a more rugged set up than historical peeps for this rifle.
No promises but this sight generally works with the factory front sight.
If a front sight change is needed, we are here to help with the selection.
The Winchester bolt returns to zero and accuracy is superb. The 30-06 pictured here shoots 1 moa with 165 gr. Barnes TTSX bullets. What a great combo!
Ships with a .096" aperture installed. Mounting screws and wrenches provided
Accepts all 5 of our precision steel Apertures
Requires two 6-48 holes drilled and tapped on 1.3" C-C
Installation can be done on your bolt here in house.
Please give us a call for mounting instructions.
WINCHESTER / BROWNING 1885 High ~ Low Wall
SEE OUR BROWNING PAGE
(This sight fits the Browning AND the new (Miroku) Manufactured Rifles)
SKINNER WINCHESTER MODEL 70 SIGHT
Elegant, Simple, Functional, SOLID, and adjustable for Elevation and Windage. No Gunsmithing required.
This sight has mounting hole spacing of .860" w/ 6-48 Screws. Standard Winchester Model 70 configuration.
Like most of our receiver sights, the MODEL 70 sight ships with a .096" aperture installed.
Mounting/Adjusting wrenches and screws are included.
NOTE: If you have a Winchester Mod. 70 chambered for 458 Win Mag or 375 H&H please email me for special hole spacing. (.330" instead of standard .860")
BLUE ~ $75 and STAINLESS STEEL ~ $85
SKINNER WINCHESTER MODEL 88/100 "EXPRESS" SIGHT
The Winchester 88/100 Rifles are wonderful time capsules showcasing the care and attention to detail of an era gone by. These classics are loved by their owners and a treasure sought by those hoping to acquire one. Something about mounting a scope on these sleek rifles just seems a little out of place. SKINNER SIGHTS now makes our "EXPRESS" sight available for these models.
Due to the many calibers and variations, front Sight height is best determined by installing the new SKINNER "EXPRESS" sight and shooting on paper at a known distance with the factory front sight.
BLUE STEEL ~ $95 "BLACK GOLD" ~ $115
Fully Elevation and Windage Adjustable.
(Comes with a .096" Aperture installed and will accept any of our 5 APERTURE sizes)
Shipped with a STANDARD .096" Aperture
(Extra apertures in assorted sizes available, click HERE...