CONTENDER and ENCORE
As RUGGED and ACCURATE as
the rifles that wear them,
SKINNER SIGHTS TC MODEL
fits the CONTENDER and ENCORE
firearms made by Thompson Center Arms.
This sight fits in the factory threaded sight mounting holes with NO Gunsmithing required.
The Skinner TC Sight
is designed to compliment the simple yet elegant lines of these great firearms.
Shown here installed on a Classic
this sight compliments the lines of the gun, sits low and looks like it "Grewin Place".
The Thompson Center Contender and Encore carbines are a great all around single shot with great handling ergonomics.
If you are looking for LIGHT and HANDY, using a SKINNER SIGHT
replaces the need for a scope and mounts allowing the gun to be
much lighter for ease of carrying in the field.
Shown here on the very popular, reliable, effective Thompson Center Endeavor Muzzle Loader. Our testing says this will work with the factory Fiber Optic Front sight, however, we always say SHOOT N SEE.
To compliment the simplicity of these quality rifles, Skinner Sights
offers this FULLY ADJUSTABLE FOR WINDAGE AND ELEVATION
Peep Sight / Aperture Sight that is as rugged as the rifle itself.
Windage is adjusted with a cross dovetail slide while
elevation is controlled via the threaded aperture stem.
Both adjustments are locked in place with set screws to insure
the sight stays where you need it.
(Screws and wrenches for mounting and adjustment are included)
Shown here mounted on a TC ENCORE you can see the low design
(.380" from top of barrel to center of "Peep")
allowing a "NO SNAG" durable sight for your gun.
BLUE ~$75 BRASS ~$80 STAINLESS ~$85
Sight is shipped with our "Standard" .096" Aperture installed.
Extra APERTURES available
on our aperture page.
Also see our
Page for other products
for your shooting needs.
Thompson Center "RENEGADE"
This sight will fit many of the TC Muzzle Loader Octagon Barrels
Available in BLUE ~ $75 and in "BLACK GOLD" ~ $95
(Fully Windage and Elevation Adjustable)Ships with a .125" Aperture installed
No gunsmithing required, screws and wrenches included for mounting and adjusting. Front sight height will be variable. Install the Skinner Sight, then shoot on paper at a known distance with your load and projectile choice. Make front sight changes if / as needed.
Skinner Sights in "BLACK GOLD"
For a touch of "CLASS"
and a bit of extra "BLING"
to any of our Windage Adj. Sights.
Order this option from our SPECIAL ITEMS page.
Feel free to CONTACT me with any questions.
WILL MY FACTORY FRONT SIGHT WORK
WITH THE SKINNER SIGHT???
This is the most common question we are asked.
Please read the information on our
FRONT SIGHT and FAQ
page for answers to this question.
To help answer the question we also offer the following Info:
The Skinner Sights TC ENCORE/CONTENDER sight is approx.
.375" from the top of the barrel to the center of the aperture.
The Skinner Sight has about 16 MOA of elevation adjustment.
MIKE BELLM TCsMike Bellm
has long been considered the "GURU
" when it comes to Accurate and Dependable Thompson Center CONTENDERs
If you need BARRELS, PARTS
, MODIFICATIONS, SERVICE
or installation of your
, Mike can help you achieve
SUCCESS! Contact Mike at: www.bellmtcs.com