PLEASE READ OUR FAQ PAGE 
Made_in_USA_small
 
SCOPE MOUNTS
95EXPRESSMOUNTWSCOPEe
 















We are now offering our famous 
Skinner "EXPRESS" sight with integral scope mount.  
 
This mount uses medium height Talley Quick Detatch Rings
(available from Brownells.com)
 
TALLEY QD Mfg. part # 500004

Or we have them in stock.  (Blued Mat Finish)


Talley_QD_RingsIn my opinion, these are the highest quality and most elegant rings available.

The QUICK DETACH Levers are secure, easy to use, and return to zero everytime.

These rings are not Weaver/Picatinny style.

For the Large Frame Rifles we supply a recoil stop screw for the rear ring to butt against.


The Marlin 1894 and Henry BIG BOY mounts have a built in recoil lug.
 

(Notes on Rings)
 
WARNE 7.3 Rimfire Rings will fit our mount.  I have not tested the Rimfire rings on the larger "Rifle" Calibers.   I have been using them successfully on the "Pistol" Caliber mounts.  (Marlin 1894 and Henry Big Boys) 
 
The TALLEY Rings do not have recoil lugs. 
We supply a recoil stop screw for use with the TALLEY Rings. 

The screw MUST be installed for use with Talley Rings. 
 
This base does not accept "Weaver" or "Picatinny" style rings. 

Our base is designed to look "CLASSIC" "TRADITIONAL" and "SLEEK" 
with the scope mounted and removed.  

Unlike the Picatinny Rails, this does NOT feel or look
like a cheese grater on top of your rifle.


 













AVAILABLE FOR THE MARLIN 336/1895 
 and HENRY LARGE FRAME RIFLES 30-30 / 45-70
 
(These Large Frame Marlin and Henry rifles use the same sight/mount)
 
Henry_SM_Express
Henry_SM_Express_B





           


 




 











HENRY ALL WEATHER

HENRY_ALL_WEATHER_SCOPE_MOUNT
 

             FOR THE MARLIN 1894


MARLIN_1894_SCOPE_MOUNT_A


MARLIN_1894_SCOPE_MOUNT_B
 

HENRY BIG BOY STEEL RIFLES

BIG_BOY_EXPRESS_SCOPE_MOUNT_A


BIG_BOY_EXPRESS_SCOPE_MOUNT_B















AND HENRY BIG BOY BRASS FRAME RIFLES
(NOTE:  ONLY OUR BRASS BIG BOY SCOPE MOUNT WILL FIT THE BRASS FRAME RIFLES.)

HENRY_BIG_BOY_BRASS_SCOPE_MOUNT_A


HENRY_BIG_BOY_BRASS_SCOPE_MOUNT_B
 
The EXPRESS SCOPE MOUNT sight ships with a .096" (std) aperture installed.  Other aperture sizes available on our APERTURE page.
 
Apertures_E
Apertures_E_c








 

Sight/mount fits the factory drilled and tapped holes on top of the rifle receiver. 

 
 No gunsmithing required.  
Mounting screws and wrenches included
 
Scope Mounts with Integral Peep are available in the following options
Blue Steel ~ $149   Stainless Steel ~ $159  BLACK GOLD ~ $169

And solid Brass ~ $159


(Brass Mount is only for the BIG BOY BRASS Rifles)
(Pistol Caliber Big Boys Model H006)
 
FLAVOR
RIFLE MODEL
 
TALLEY QD MEDIUM RINGS
(Mat Blue Finish)
Talley_QD_Rings
$115
 
BLUE MAT MEDIUM HEIGHT


 

TWO PIECE SOLID STEEL SCOPE MOUNTS

500SBE

















Typical WEAVER style bases machined from solid steel barstock.

Fits 336/1895 (and all large frame) Marlin
and Henry large frame  30-30 / 45-70  Rifles

And Henry "LONG RANGER" Rifles

(Long Ranger Rifles are supplied from the factory with Skinner Scope Mounts)

 
Order a (Single) for one mount  ~  $15
 
Order a (Pair) for two  ~  $28
 
(please read this carefully)
 
IF YOU NEED TWO, ORDER A PAIR
Ordering a single when a pair is needed will result in paying shipping costs twice.
 
(Mounting a scope on the receiver requires TWO)

Includes mounting screws and wrenches
(Use one base for mounting small red dot / holographic sights)
8-40 Screws on .500" C~C hole spacing
 
Single or Pair


DOVETAIL SLOT SCOPE MOUNT
     
  Sometimes you just "Need" one of these!

     Machined from a solid piece of steel
       (Shown here in the "white" for Contrast)

       Standard Nominal 3/8" Dovetail
               (May require slight fitting)

Typical "WEAVER" Style base with an integral dovetail on the bottom.  Set screw in the center and two "leveling" brass tipped set screws fore and aft.  Wrenches and screws included.  No modification to the rifle necessary.  Replaces the factory rear sight.

 
DTSCPMTtop               


                   
BLUED STEEL 
      (Shown here in the "White" for Contrast)


                         $39
 
DT Scope Mount

LEUPOLD DELTA POINT PRO MOUNTS

We set out to build the strongest, lowest mount for the Leupold Delta Point Pro

This mount is machined from solid steel barstock and is only .150" thick.

It features steel locator pins and can be mounted in either direction.

By eliminating the Picatinny base and Clamping mount system we get the Leupold Delta Point Pro WAY down on the receiver for a more natural cheek weld.  This mount is stronger than the sight itself and easy to install.

No gunsmithing required.

CURRENTLY AVAILABLE FOR THE MARLIN AND HENRY RIFLES
And the RUGER PC CARBINE

(Other models to come including for Burris Fastfire and Trijicon RMR)
(Not available yet)

SKINNER_DELTA_POINT_PRO_MOUNT_A

MARLIN
FITS 1894/1895/336

ALSO FITS HENRY BIG BOY and 30-30/4570
(Marlins and Henrys use the same mount)


Can be mounted forward on the large frames or 
to the rear on Large and Small Frames.

DELTA_POINT_MARLIN_A

DELTA_POINT_MARLIN_B

RUGER PC CARBINE
(Replaces the rear sight for an ultra low mount)

DELTA_POINT_RUGER_PCC_A

DELTA_POINT_RUGER_PCC_B
 
MOUNTING PLATES ARE SUPPLIED WITH SCREWS
AND WRENCHES

All Models ~  $55

 
DELTA POINT PRO MOUNT
 

Copyright 2013-2016 Skinner Sights LLC / Andy Larsson - All Rights Reserved

  Site Map