Description
If you want to add a receiver sight to your #H004 GOLDEN BOY, consider our Skinner Sights GOLDEN BOY "EXPRESS."
(The GOLDEN BOY is a RIMFIRE CALIBER. If you have a CENTERFIRE pistol caliber rifle, please see our BIG BOY "EXPRESS")
This sight requires our "Drill and Tap" service. (Can also be installed by a Gunsmith or Advanced Hobbyist.)
Fully adjustable for windage and elevation. Ships with a .096" aperture, wrenches and mounting screws.
We think the contrast it brings to the rifle looks AMAZING.
We recommend shooting on paper with your new EXPRESS sight prior to making a front sight change. Using the results, front sight selection is much easier.
Directions for Cover Removal:
1. Check to make sure the rifle and magazine are unloaded and pointed in a safe direction.
2. Remove the rear tang screw allowing buttstock removal.
3. Remove the four large headed screws on each side of the receiver cover. (Always use a carefully fitted screwdriver tip and be extra careful to not scratch the receiver finish)
4. Cock the hammer.
5. Lift the cover up and to the rear, sliding it off of the rifle.
6. Carefully wrap the receiver in a padded wrap and ship using a cardboard box.
7. Send it to:
Skinner Sights LLC, P.O. Box 1810, St. Ignatius, MT 59865
(Installation fee is $38 for the drill and tap service. Return shipping is $15. Please include a check or money order with the receiver cover for these charges.)
Tab title
If you want to add a receiver sight to your #H004 GOLDEN BOY, consider our Skinner Sights GOLDEN BOY "EXPRESS."
(The GOLDEN BOY is a RIMFIRE CALIBER. If you have a CENTERFIRE pistol caliber rifle, please see our BIG BOY "EXPRESS")
This sight requires our "Drill and Tap" service. (Can also be installed by a Gunsmith or Advanced Hobbyist.)
Fully adjustable for windage and elevation. Ships with a .096" aperture, wrenches and mounting screws.
We think the contrast it brings to the rifle looks AMAZING.
We recommend shooting on paper with your new EXPRESS sight prior to making a front sight change. Using the results, front sight selection is much easier.
Directions for Cover Removal:
1. Check to make sure the rifle and magazine are unloaded and pointed in a safe direction.
2. Remove the rear tang screw allowing buttstock removal.
3. Remove the four large headed screws on each side of the receiver cover. (Always use a carefully fitted screwdriver tip and be extra careful to not scratch the receiver finish)
4. Cock the hammer.
5. Lift the cover up and to the rear, sliding it off of the rifle.
6. Carefully wrap the receiver in a padded wrap and ship using a cardboard box.
7. Send it to:
Skinner Sights LLC, P.O. Box 1810, St. Ignatius, MT 59865
(Installation fee is $38 for the drill and tap service. Return shipping is $15. Please include a check or money order with the receiver cover for these charges.)