It is important to know WHICH Henry Rifle you own.
Correct model identity is the first step to proper sight selection. The model # would be shown on the box label if you purchased the gun new or you can identify it from photos and info HERE > HENRY RIFLE MODELS
Its important to note that Henry has 3 sizes of BRASS STYLE RECEIVER rifles. (THESE ARE BEAUTIFUL!)
Rimfire Rifles with BRASSLITE receivers are "GOLDEN BOY'S"
Centerfire PISTOL CALIBER Rifles with BRASS receivers are
Centerfire PISTOL CALIBER Rifles with STEEL receivers are also
"BIG BOYS" H012
Centerfire RIFLE CALIBER Rifles with BRASS receivers are
30-30's/45-70's Henry also makes the 30-30's/45-70's in STEEL
The NEW "LONG RANGER" H014 is chambered in 308/243/223
All BLACK receiver RIMFIRE rifles are very similar in choices. (H001 and H003) The differences are Round Barrel or Octagon Barrel. Descriptions below outline which SKINNER SIGHT works with each option.
NOTE: There are variations of each Henry Model but the Skinner Sight choices will be basically the same for all variations of the same # model.
FRONT SIGHT SELECTIONS ARE LISTED IF WE HAVE AN IDEA WHAT "MIGHT" WORK WITH YOUR RIFLE.
(If no front sight suggestion is listed here then all standard front sight selection process applies. "Install the new Skinner Sight, using the factory front sight, shoot on paper at a known distance, use the results to make front sight changes IF needed)
PLEASE SEE OUR FAQ PAGE FOR MORE FRONT SIGHT DETAILS.
Henry Repeating Arms has been making beautiful leverguns for many years.
In a Letter from Anthony Imperato
(President of HRA)
he says this about SKINNER SIGHTS.
"We already recommend on a daily basis your peep sight that fits in the dovetail slot."
ALL SKINNER SIGHTS HAVE
FULL WINDAGE AND ELEVATION ADJUSTMENT
(except the LoPro which has elevation adjustment only)
BARREL MOUNTED DOVETAIL SIGHT
This sight works well on any Henry rifle with a 3/8" Dovetail
These photos were taken by a customer who wrote:
"Hey Andy, I finally had the chance to install your sights on my Henry Golden Boy and Big Boy. I took them to the range this past weekend and am thoroughly enjoying
the enhanced focus."
(Shown here on a Henry "Big Boy")
"I cant tell you how happy I am with these sights,they look fantastic!"
THESE SIGHTS WORK!
With a barrel mounted peep sight you don't need to worry about where the front sight is in the " notch". Just look through the aperture and put the front sight on the target.
(Shown here on a Henry "GOLDEN BOY")
Blue $50 ~ Brass $52 ~ Stainless $54
The Barrel mount "usually" works with the factory front sight.
For the Henry rifles that are drilled and tapped
under the factory barrel mounted sight
(Please look under the factory rear sight)
(This is for octagon barreled rifles)
#H004 ~ Golden Boy's and #H001T ~ Frontier's
we offer the
Skinner "HENRY OCTAGON SCREW MOUNT" sight.
This sight uses the factory drilled holes on the barrel flat just forward of the
receiver on the Henry Octagon rifles.
(Your will find the holes UNDER
the factory rear sight)
Supplied with mounting screws and hex wrenches for installation.
BLUE ~ $75 BRASS ~ $90 BLACK GOLD (or silver) ~ $95 and SKINNER GOLD ~ $100 (pictured below)
Shown here in "BLACK GOLD" (optional)
(Also available in "BLACK SILVER" for the EVIL ROY and other Silver colored receivers)
This sight generally requires a taller front sight. No promises (please see our FAQ page) but our 3/8"X.600" Front Sight or .570" Bead or Fiber Optic are good places to start.
(Sight is .420" from top of barrel to center of aperture)
(Ships with a .125" aperture installed)
FULLY WINDAGE AND ELEVATION ADJUSTABLE
The Skinner OCTAGON BARREL SCREW MOUNT Sight
(Identical to the sight above except for color/material)
is also available in SKINNER "GOLD"
Something about GOLD looks
amazing on Henry Rifles. This
"contrast" will look fantastic
when mounted on the barrel of
your Brass Framed Henry!
$100 as pictured
PLEASE ORDER USING THE DROP BOX ABOVE
THE Skinner "RIMFIRE" Groove Sight
Skinner "BLACK GOLD" Option (Shown)
This sight looks GREAT on your .22 and 17 HMR Henry Rifles (#H001 MODELS WITH GROOVES ON TOP OF THE RECEIVER.)
Fully Elevation and Windage Adjustable
BLUE ~ $80 BLACK GOLD ~ $100
Mounting Instructions: Remove your existing barrel mounted rear sight (using a brass punch ) and replace it with a dovetail blank. On octagon barreled models there may be two threaded holes underneath the factory rear sight. Fill those holes with two 8-40 Fill Screws.
Loosen the rear "pinch" screw on the Skinner RIMFIRE sight and slide it carefully onto the top receiver "GROOVES" from the rear of the receiver. Set in desired position and tighten the rear "pinch" screw enough to keep the sight from sliding.
Adjust windage by loosening the top set screw and gently tapping (wooden dowel or brass punch) right and left. Once proper windage has been achieved, re-tighten the set screw.
Elevation is adjusted by loosening the set screw on the right side and threading the aperture stem up and down in 1/2 turn increments. Re-tighten set screw.
For round barrel rifles see our front sight/ramp/barrel band combo dovetailing service listed below.
On RIMFIRE Octagonal barrel models, use one of our 3/8" X .600" barrel mounted front sight and "trim" to the exact height you need while actually shooting on paper. Touch up with Skinner BLUE and you are ready to go!
SPECIAL MODEL FOR THE
Models H001 and H003
(This is my first choice for these rifles)
PHOTO COMING SOON
SAME AS THE HENRY SMALL GAME CARBINE
SKINNER SIGHTS is now offering a SLIM, TRIM, AND BEAUTIFUL sight for the HENRY H001 and H003 series Rimfire rifles. This sight requires drilling and tapping two 8-40 holes in the receiver cover.
Fully Adjustable for windage and elevation, this sight sits .080" lower than our RIMFIRE Groove mounted sight. Consequently there is a good chance (cannot guarantee for the reasons listed on our FAQ page) that it will work with your factory front sight.
SKINNER H001 Receiver Sight in Blue Steel ~ $55
HENRY REPEATING ARMS OFFERS OUR H001 SIGHT OEM INSTALLED ON A COUPLE H001 MODELS. (Small Game Carbine and Rifle)
Mounting screws and wrenches included.
Sight ships with a .096" aperture installed
SIGHT USES 8-40 SCREWS LOCATED 1" C-C. THE FRONT SCREW IS LOCATED 2.75" FROM THE FRONT OF THE RECEIVER COVER EDGE. THE REAR SCREW IS LOCATED EXACTLY 1" (@ 3.75") FURTHER TO THE REAR, BOTH SCREWS DRILLED EXACTLY ON THE CENTERLINE OF THE TOP RIB. #29 drill / 8-40 Tap
The New Henry H010AW All Weather Rifles are AMAZING!
The fit and finish of this rifle is great, the action smooth, and accuracy is spot on
The black stock is not painted but rather a deep dark black
stain that shows the wood grain nicely.
Our friends at HENRY RIFLES really hit it out of the park with this one!
FOR YOUR H009/H010/H024 RIFLES ALSO SEE OUR "RELIABLE" and "WINGED" Sights (Click on these links. Same as our Marlin 1895/336 Sights)
For the H006 and H012 BIG BOY rifles
order the Marlin 1894 Winged Sights.
Our standard EXPRESS and RELIABLE sights are durable enough to not need wings for protection. However, there are those who like "WINGS" and we build this sight for those who do.
Fully elevation and windage adjustable
IF YOU HAVE A
HENRY "BIG BOY" RIFLE
#H006 (Brass) and #H012 (Steel)
#H012X ~ H012MX ~ H012CX
THIS IS THE SIGHT FOR YOU
(This is THE sight for the Henry "BIG BOY" Rifle)
Skinner "BIG BOY" Express
(Fits the Henry Big Boy Rifles)
Includes Side Gate Models
What do our Customers say?
"THANK YOU FOR THE TIME AND QUALITY YOU PUT INTO YOUR SIGHTS.
WORKS PERFECTLY! VERY ACCURATE WITH LITTLE REQUIRED
ADJUSTING. MINUTE OF MILK JUG AT 200 YDS. DEAD CENTER, NO PROBLEM!"
Mike (Email dated 5-12-2015)
NO GUNSMITHING REQUIRED
(THIS SIGHT FITS THE FACTORY DRILLED AND TAPPED HOLES)
Available in BLUE, Solid BRASS, and of course our
famous "BLACK GOLD" (As shown)
NOW AVAILABLE IN SOLID STAINLESS FOR THE ALL WEATHER RIFLES NO PHOTO AVAILABLE AT THIS TIME. JUST IMAGINE A STAINLESS SIGHT ON TOP OF THE AW RECEIVER. (They are beautiful)
Front Sight selection is always best made after installing the rear sight and shooting on paper at a known distance. Customers report about 50% success using the factory front sight.
Mounting Screws / Wrenches / and Instructions are included.
Sight is designed to fit the factory drilled and tapped holes.
If we are asked, we will "suggest" our 1/2"x.650" front (and trim to exact height as needed) or our .570" tall Fiber Optic front sight. These are just suggestions. Please see our FAQ page for more information. It is our understanding that some of the Henry Big Boy Steel frame models have a .570" factory front sight.
For those rifles, if a taller sight is needed our .650" tall Patridge blade
would be our "suggestion".
SKINNER BEAR BUSTER FRONT SIGHTS
FOR THE NEW HENRY X MODEL RIFLES
Available in WHITE FACE (Shown), BLUE STEEL, and SOLID BRASS
Machined from solid Steel or Brass barstock, this sight is virtually unbreakable
Uses a single screw (included) for mounting
.560" tall (top of barrel to tip of sight blade)
(ONLY FOR THE X MODEL RIFLES)
Henry "LONG RANGER" Rifle Model H014
Henry has come out with a totally new rifle chambered in longer range calibers like 308 Winchester / 243 Winchester / and 223 Remington
Skinner Sights has three models of Aperture Sights and scope mounts available for this rifle. All three are designed to fit the factory drilled and tapped holes on top of the receiver.
All 3 are Windage and Elevation Adjustable
Ships with a .096" Aperture installed (Five sizes of APERTURES available)
The Skinner "EXPRESS"(Shown)
Blue Steel ~ $90 Brass ~ $95 "BLACK GOLD" ~ $110
(Pictured here in Brass for contrast)
Henry EXP Long Ranger BRASS $95.00 USD
Henry EXP Long Ranger BLACK GOLD $110.00 USD
The Skinner "ALASKAN" (Photo to come, longer, sleeker, like our other ALASKAN sights)
The Skinner "EXPRESS" Scope Mount with Integral Peep (Photo to come, looks like our other EXPRESS scope mounts)
Please see our SCOPE MOUNTS page
Blue Steel ~ $149 "BLACK GOLD" ~ $169
These sights are part of our regular production and ready to ship.
HENRY FRONT SIGHT/BARREL BAND MODIFICATION
If you have tried adding a receiver sight (or needed a different front sight) to a Henry Repeating Arms Rimfire, 30-30 or 45/70 round barrel lever action rifle, you may have discovered that the one piece sight/ramp/barrel band combo leaves very few options for a change.
Skinner Sights offers a modification to the STEEL (not the former plastic) front sight/ramp/band combos that will allow mounting the front sight of your choice.
We will dovetail the sight ramp with a standard 3/8" dovetail and Hot Blue the assembly for $30. If you want a Skinner Patridge Front sight installed, we can do that also and ship it back to you assembled.
Send me the Sight/Ramp/Band Assembly and a check for the $30 plus $10 return shipping and allow two weeks turn around time. Be sure to pack it well and include the mounting screws.
(For a fitted Skinner Patridge front sight add $20 for Blue and $22 for Brass)
(Front sight hood will still fit with this modification but the distance
from the top of a taller front sight to the hood will of course be smaller)
P.O. Box 1810
St. Ignatius, MT 59865 The Mini SHOT Reflex RED DOT Sight
Using our SIMPLE, LOW, SPECIAL MOUNT, this RED DOT
Reflex sight is a great companion to your SKINNER PEEP SIGHT
This sight will fit the:
~ HENRY FRONTIER #H001T (and variants)
~ HENRY PUMP #H003
~ GOLDEN BOY #H004
~ 30-30 OCTAGON #H009B
~ The BIG BOY #H006
(when used as a primary rear sight or in conjunction with a SKINNER BARREL MOUNT Sight.)
You can remove the sight in the field and re-install without special tools.
The base is low enough to use the SKINNER SIGHTS
when the Red Dot is removed.
HENRY Model 1860 Repeating Rifles #H011 (And reproductions made by Uberti and Pedersoli, Navy Arms and Taylor Arms.)
This sight mounts in the existing factory dovetail with no modifications to the firearm. The aperture is bright and clear to the eye. We supply this sight with a .155" (X Large) peep to accommodate the wide factory front sight of the 1860 Rifle.
I have been shooting this exact sight (as pictured) on my own 1860 Henry Rifle
(44-40) and accuracy is amazing!
The sight picture is quick to acquire. Just look through the peep and focus on the front sight. Machined from solid 360 brass bar stock this sight looks like it could have been installed during the Civil War. (If Skinner Sights had been present during that era, we would have made sure they were!)
Available only in Brass.
Ships with .155" aperture installed. Fully adjustable for windage and elevation. Mounting Instructions and adjusting wrenches included.
WE DO NOT MAKE A FRONT SIGHT FOR THIS RIFLE AT THIS TIME.